Voltammetric analysis of pholcodine on graphene-modified GNPs/PTs with green assessment.

Pholcodine, an anti-tussive medication widely used as an over-the-counter, OTC drug, has recently faced restrictions in several countries. This paper presents a sensitive electrochemical approach for pholcodine detection. The electrochemical method involved fabricating a graphene nanoplatelets electrode, incorporating polythiophene nanospheres polymer to promote electron transfer and increase the activated surface area. Characterization of the fabricated electrode was performed using transmission electron microscopy, ATR-Fourier-transform infrared spectroscopy, X-ray crystallography, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. The electrochemical behavior of pholcodine with the fabricated electrode was investigated using cyclic voltammetry, chronoamperometry, square wave voltammetry (SWV), and differential pulse voltammetry (DPV). The developed electrode led to a linear response for pholcodine ranging from 10 to 45 mg/L with detection limits of 1.41 and 1.51 mg/mL for SWV and DPV, respectively and quantification limits of 4.27 and 4.57 mg/L for SWV and DPV, respectively. The proposed method has accurately recovered pholcodine in spiked serum samples with a recovery percentage ranging from 1.2 to 2.9%. The optimized method is found to be accurate, precise, and robust by applying validation parameters provided by International Council for Harmonization. Two green metrics were computed to assess the method's greenness, the findings showed that the developed method is environmentally friendly with minimum sample preparation steps.

Correction: Highly selective optical sensor N/S-doped carbon quantum dots (CQDs) for the assessment of human chorionic gonadotropin ß-hCG in the serum of breast and prostate cancer patients.

[This corrects the article DOI: 10.1039/D3RA01570J.].

Correction: Novel sensor for the determination of CA 15-3 in serum of breast cancer patients based on Fe-gallic acid complex doped in modified cellulose polymer thin films.

[This corrects the article DOI: 10.1039/D3RA02495D.].

Novel sensor for the determination of CA 15-3 in serum of breast cancer patients based on Fe-gallic acid complex doped in modified cellulose polymer thin films.

Fe-gallic acid MOF embedded in an epoxy methyl cellulose polymer (CMC) thin film was synthesized and characterized by different micro-analytical tools such as: FE-SEM/EDX, XPS analysis, XRD analysis, FT-IR, and fluorescence spectroscopy. Fe-gallic acid MOF doped in a stable CMC polymer thin film is used as a novel sensor to identify CA 15-3 in the sera of patients suffering breast malignancy. The presence of appropriate functional groups in aqueous CA 15-3 solutions enables it to interact with the Fe-gallic acid MOF embedded in the thin film. The Fe-gallic acid MOF was found to absorb energy at 350 nm (λex) and emits radiation at 439 nm which was specifically quenched in the presence of CA 15-3 over a working concentration range of 0.05-570 U mL-1. In contrast to other CA 15-3 detection methods which suffered from electronic noise, interference and slowness, the Fe-gallic acid MOF proved its sensitivity as an economic, stable and reliable probe for the detection and determination of CA 15-3 in patients' serum samples with a detection limit of 0.01 U mL-1 at pH 7.2.

Highly selective optical sensor N/S-doped carbon quantum dots (CQDs) for the assessment of human chorionic gonadotropin ß-hCG in the serum of breast and prostate cancer patients.

A low-cost, accurate, and highly selective method was used for the assessment of the human chorionic gonadotropin ß-hCG in the serum of breast and prostate cancer patients. This method is based on enhancing the intensity of luminescence displayed by the optical sensor N/S-doped carbon dots (CQDs) upon adding different concentrations of ß-hCG. The luminescent optical sensor was synthesized and characterized through absorption and emission and is tailored to present blue luminescence at λem = 345 nm and λex = 288 nm at pH 7.8 in DMSO. The enhancement of the luminescence intensity of the N/S-doped CQDs, especially, the characteristic band at λem = 345 nm, is typically used for determining ß-hCG in different serum samples. The dynamic range is 1.35-22.95 mU mL-1, and the limit of detection (LOD) and quantitation limit of detection (LOQ) are 0.235 and 0.670 mU mL-1, respectively. This method was practical, simple, and relatively free from interference effect. It was successfully applied to measure PCT in the samples of human serum, and from this method, we can assess some biomarkers of cancer-related diseases in human body.

A highly selective optical sensor Eu-BINAM for assessment of high sensitivity cardiac troponin tumor marker in serum of cancer patients.

A novel, easy, touchy and selective spectrofluorimetric technique has been successfully applied for sensitive determination of High Sensitivity Cardiac Troponin (TNHS I) in the serum samples of patients suffering malignant tumors through the usage of optical sensor Eu3+-BINAM complex. The technique is primarily based on quenching of the Eu3+-BINAM complex's luminescence intensity upon introducing various concentrations of High Sensitivity Cardiac Troponin (TNHS I). The synthesis and characterization of the optical sensor was performed via absorption and emission. The sensor was also adapted to offer excitation at 394 nm in acetonitrile at pH 7.5. Concentration of High Sensitivity Cardiac Troponin (TNHS I) in serum samples was found to be proportional to the luminescence intensity quenching of the Eu3+-BINAM complex, most prominently at λem = 618 nm. The limit of the dynamic range is 4.26 × 10-4 to 2 ng/mL. The limit of detection and quantitation were calculated to be 1.35 and 4.10 ng/mL, respectively. The suggested analytical approach proved its applicability, simplicity and comparatively interference- free. The technique was effectively recruited to quantify High Sensitivity Cardiac Troponin (TNHS I) in human serum samples. The proposed technique could be further extended to evaluate some biomarkers associated with malignancy related diseases in human.

Fabrication of novel electropolymerized conductive polymer of hydrophobic perfluorinated aniline as transducer layer on glassy carbon electrode: application to midazolam as a model drug of benzodiazepines.

The objective of this study is to fabricate solid-contact ion selective electrodes (SC-ISEs) that have long term stable potential. Various conducting polymers such as polyaniline and its derivatives have been successfully employed to improve the potential stability in SC-ISEs. Recently, the role of hydrophobicity at the interface between the conducting polymer solid contact and the ion sensing membrane has been investigated and figured out that the hydrophobic interfaces preclude water layer formation that deteriorate the SC-ISEs potential stability and reproducibility. In this work, a hydrophobic polyaniline derivative was fabricated on the surface of a glassy carbon electrode by electropolymerization of perfluorinated aniline monomers in acidic solution. The electropolymerized hydrophobic polymer was characterized by electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy. The fabricated electrode was employed for determination of midazolam-a model drug-in pharmaceutical formulation without prior extraction. The SC-ISEs performance was optimized, and the potential drift was compared to control SC-ISEs, the SC-ISE linear range was 1 × 10-6-1 × 10-2 M, LOD was estimated to be 9.0 × 10-7 M, and potential drift was reduced to 100 µV/h.

Development of potent nanosized carbonic anhydrase inhibitor for targeted therapy of hypoxic solid tumors.

Overexpression of two carbonic anhydrase (CA) isoforms, CA IX and XII, in several hypoxic solid tumors provides an extracellular hypoxic microenvironment, interferes with extra- and intracellular pH regulation, thus favoring hypoxic tumor cell survival, proliferation and metastasis. In the current study, a selective inhibitor for human CA isoforms IX and XII (isatin-bearing sulfonamide, WEG-104), was incorporated into nanosized spherical niosomes at high encapsulation efficiency to allow for an enhanced and sustained antitumor activity. In vivo, administration of WEG-104 that is either free (10 mg/kg) or loaded into niosomes (5 mg/kg) into a mice model of Ehrlich ascites solid tumor resulted in comparable efficacy in terms of reduction of tumor weight and volume. Administration of WEG-104-loaded niosomes (10 mg/kg) exhibited superior antitumor activity compared to the free drug, evidenced by reduced tumor weight and volume, marked reduction in the activity of CA IX and XII, and suppression of HIF-1α and MMP-2. Moreover, prominent increase of caspase 3 and pronounced decrease in VEGF immune expression were observed in the treated animals. Hence, loading of molecularly designed compounds that targets CAs in hypoxic solid tumors into nanosized delivery systems provided an auspicious strategy for limiting solid tumor progression and malignancy.

Development and validation of molnupiravir assessment in bulk powder and pharmaceutical formulation by the RP-HPLC-UV method.

An accurate, sensitive and selective RP-HPLC-UV method has been established for the estimation of Molnupiravir (MOL) in pure bulk powder and pharmaceutical formulation. Separation was achieved on an Inertsil C18 column (150.0 mm × 4.6 mm, 5.0 µm), using a mobile phase of 20 mM phosphate buffer pH 2.5 : acetonitrile (80 : 20, v/v%) in isocratic mode with a flow rate of 1.0 mL min-1. The λ max of MOL prepared in the chosen diluent (ethanol : water in equal proportions) was found to be 230.0 nm. The constructed calibration curve was found to be linear in the concentration range of 0.2-80.0 µg mL-1. The recovery% of MOL using the proposed method was 100.29%. The limit of detection (LOD) and limit of quantification (LOQ) were 0.04 µg mL-1 and 0.12 µg mL-1, respectively. No significant interference was detected in the presence of the common pharmaceutical formulation excipients. The method was validated following the ICH recommendations. All the obtained results were statistically compared with those using reported methods and there were no significant differences. The method developed in this work was successfully employed for the assessment of MOL in bulk powder and pharmaceutical formulation.

Synthesis and characterization of new 1,3,4-thiadiazole derivatives: study of their antibacterial activity and CT-DNA binding.

1,3,4-Thiadiazole molecules (1-4) were synthesized by the reaction of phenylthiosemicarbazide and methoxy cinnamic acid molecules in the presence of phosphorus oxychloride, and characterized with UV, FT-IR, 13C-NMR, and 1H-NMR methods. DFT calculations (b3lyp/6-311++G(d,p)) were performed to investigate the structures' geometry and physiochemical properties. Their antibacterial activity was screened for various bacteria strains such as Enterobacter aerogenes, Escherichia coli ATCC 13048, Salmonella kentucky, Pseudomonas aeruginosa, Klebsiella pneumoniae, Proteus and Gram positive such as Staphylococcus aureus ATCC 25923, Listeria monocytogenes ATCC 7644, Enterococcus faecium, Enterococcus durans, Staphylococcus aureus ATCC, Serratia marcescens, Staphylococcus hominis, Staphylococcus epidermidis, alfa Streptococcus haemolyticus, Enterococcus faecium and found to have an inhibitory effect on Klebsiella pneumoniae and Staphylococcus hominis, while molecules 1, 3 and 4 had an inhibitory effect on Staphylococcus epidermidis and alpha Streptococcus haemolyticus. The experimental results were supported by the docking study using the Kinase ThiM from Klebsiella pneumoniae. All the investigated compounds showed an inhibitory effect for the Staphylococcus epidermidis protein. In addition, the mechanism of the 1-4 molecule interaction with calf thymus-DNA (CT-DNA) was investigated by UV-vis spectroscopic methods.

A highly selective and sensitive spectrofluorimetric method for the assessment of 3-nitrotyrosine in serum using (Eu(TTA)3Phen) photo probe.

A simple, accurate and fast method was developed for the assessment of 3-nitrotyrosine as a biomarker for the early diagnosis of liver cirrhosis with minimal hepatic encephalopathy (MHE) using a (Eu(TTA)3Phen) photo probe. 3-Nitrotyrosine can remarkably quench the luminescence intensity of the (Eu(TTA)3Phen) complex in DMSO at pH = 9 and λ em = 617 nm. The quenching of the luminescence intensity of (Eu(TTA)3Phen) complex particularly the electrical emission band at λ em = 617 nm is used for the assessment of 3-nitrotyrosine in different serum samples of patients with liver cirrhosis.

Development of a multivariate model with desirability-based optimization for determination of atenolol and hydrochlorothiazide by eco-friendly HPLC method with fluorescence detection.

Determination of a widely used antihypertensive combination of atenolol and hydrochlorothiazide was achieved by rapid and eco-friendly high-performance liquid chromatography method combined with fluorescence detection. The response surface methodology is conducive to the complete separation of the two drugs in a shorter analysis time. The separation of the mixture was achieved using an Inertsil C18 analytical column (150 × 4.6 mm, 5 µ). The mobile phase used was ethanol: potassium dihydrogen phosphate at pH 3 (65:35 v/v) and the flow rate was 0.7 mL/min. The fluorescence detector operated at excitation and emission wavelengths of 230 and 310 nm (atenolol) and 270 and 375 nm (hydrochlorothiazide). The linearity of the developed method covered a concentration of atenolol of 0.05-5 µg/mL and a concentration of hydrochlorothiazide of 0.02-1 µg/mL. The greenness of the developed method was evaluated by analytical eco-scale and the recently reported evaluation method, that is, green analytical procedure index, and it was found to be an excellent, sensitive, and green alternative to the reported methods. The developed method was validated according to the ICH guidelines and compared with the reference method. No significant difference was found in terms of accuracy.

Emerging advances and current applications of nanoMOF-based membranes for water treatment.

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.

Novel Optical Biosensor Based on a Nano-Gold Coated by Schiff Base Doped in Sol/Gel Matrix for Sensitive Screening of Oncomarker CA-125.

The urge for sensitive, facile, minimally invasive, and fast detection method of CA-125, a significant and crucial biomarker in ovarian malignancy, is currently substantial. This paper describes the detailed construction and characterization of a newly designed optical nano-biosensor to detect CA-125 accurately and sensitively. The fabricated sensor consists of a nano-gold thin film doped into a matrix of sol-gel, exhibiting a centered fluorescence band at 423 nm when excited at 340 nm. The quantification of CA-125 relies on its quenching ability of this fluorescence signal. The sensor was challenged to evaluate its sensitivity and specificity in detecting CA-125 present in samples collected from ovarian cancer diagnosed patients and compared to samples from healthy women as a control. Our findings revealed that the developed biosensor had a sensitivity of 97.35% and a specificity of 94.29%. Additionally, a wide linearity range over 2.0-127.0 U mL-1 for CA-125 was achieved with a detection limit of 1.45 U mL-1. Furthermore, the sensor could successfully discriminate samples between healthy and diseased people, which demonstrates its suitability in CA-125 assessment.

All solid-state miniaturized potentiometric sensors for flunitrazepam determination in beverages.

Flunitrazepam is one of the frequently used hypnotic drugs to incapacitate victims for sexual assault. Appropriate diagnostic tools should be available to victims regarding the growing concern about "date-rape drugs" and their adverse impact on society. Miniaturized screen-printed potentiometric sensors offer crucial point-of-care devices that alleviate this serious problem. In this study, all solid-state screen-printed potentiometric flunitrazepam sensors have been designed. The paper device was printed with silver and carbon ink. Formation of an aqueous layer in the interface between carbon-conducting material and ion-sensing membrane nevertheless poses low reproducibility in the solid-contact electrodes. Accordingly, poly(3,4-ethylenedioxythiophene) (PEDT) nano-dispersion was applied as a conducting hydrophobic polymer on the electrode surface to curb water accumulation. Conditioning of ion-sensing membrane in the vicinity of reference membrane has been considered carefully using special protocol. Electrochemical characteristics of the proposed PEDT-based sensor were calculated and compared favorably to PEDT-free one. The miniaturized device was successfully used for the determination of flunitrazepam in carbonated soft drinks, energy drink, and malt beverage. Statistical comparison between the proposed sensor and official method revealed no significant difference. Nevertheless, the proposed sensor provides simple and user-friendly diagnostic tool with less equipment for on-site determination of flunitrazepam.

Validation of a novel UPLC-MS/MS method for estimation of metformin and empagliflozin simultaneously in human plasma using freezing lipid precipitation approach and its application to pharmacokinetic study.

A fast, sensitive one step UPLC ESI-MS/MS method was successfully applied for the simultaneous estimation of two concurrently administrated antidiabetic drugs, Metformin (MET) and Empagliflozin (EMPA) in human plasma. Metformin-d6 (MET-d6) and Empagliflozin-d4 (EMPA-d4) were utilized as internal standards. Extraction of the analytes from the human plasma was performed through acetonitrile precipitation technique followed by freezing the precipitated plasma proteins and lipids to minimize the matrix effect. Chromatographic analysis was developed on Acquity UPLC BEH C18 column (1.7 µm, 2.1 × 50 mm) using isocratic elution mode. A mobile phase of formic acid (0.01 %): acetonitrile (70:30 v/v) with a flow rate of 0.3 mL/min achieved optimum separation. Multiple reaction monitoring (MRM) in positive ion mode, with transitions at (m/z) 130.14 →71.08 for (MET), 451.72 →71.29 for (EMPA), 136.03 →77.02 for (MET-d6), and 455.43 → 75.05 for (EMPA-d4) was used for quantification. The obtained linearity covered the concentration ranges of 10-1500 ng/mL and 2.0-250.0 ng/mL for MET and EMPA, respectively. The run time of the proposed Method didn't exceed 3.0 min allowing faster analysis and determination of larger number of samples per day without affecting accuracy and sensitivity. The presented chromatographic method could be successfully applied in pharmacokinetics studies and therapeutic monitoring of MET and EMPA in patients' plasma administrating fixed dose combination of both drug with high reproducibility and ruggedness.

Simultaneous determination of Avanafil and Dapoxetine in human plasma using liquid chromatography/tandem mass spectrometry (LC-MS/MS) based on a protein precipitation technique.

A rapid and selective LC-MS/MS method is described for the simultaneous assay of Avanafil and Dapoxetine in human plasma via a protein precipitation (PP) sample preparation technique. Tadalafil was chosen as the internal standard reaching good recovery and reproducibility while diminishing the effects of the matrix. An Agilent Zorbax Eclipse XDB C18 column (4.6 × 50 mm, 1.8 µm) was used for the chromatographic separation and analysis, while 0.1% formic acid : acetonitrile (60 : 40, v/v) was utilized at a flow rate of 0.5 mL min-1. It was revealed that 6 min stop time accomplished the best separation. The assay was linear over the range of 10-6000 ng mL-1 for both drugs. The established bio-analytical method validation was demonstrated following US-FDA recommendations including sensitivity, selectivity, linearity, accuracy and precision. Furthermore, other validation parameters were assessed such as the dilution integrity, matrix effect, carryover, and analyte stability during both short- and long-term sample processing and storage. The adopted method was efficaciously applied to a clinical study for the concurrent determination of Avanafil and Dapoxetine in human plasma.

Tb3+-atorvastatin doped in poly(ethylene glycol) optical biosensor for selective determination of progesterone and testosterone in serum samples.

An innovative, simple and cost effective Tb3+-atorvastatin photo probe was designed and used as a core for a spectrofluorometric approach to sensitively determine two vital biological compounds in serum samples. Tb3+-atorvastatin complex displays a characteristic electrical band with λ em at 545 nm with significant luminescence intensity, which is quenched in the presence of progesterone and testosterone at two variant sets of pH; 6.2 and 7.5, respectively. The conditions were optimized and the best solvent for operation was found to be acetonitrile with λ ex at 320 nm. Progesterone and testosterone were assessed in serum samples using the same optimal conditions within concentration ranges of 2 × 10-9 to 2.9 × 10-6 and 3.1 × 10-9 to 4.8 × 10-6 mol L-1, respectively. The proposed luminescence method was validated in accordance to ICH guidelines and found to be accurate, precise and specific and free from any interference. The cost effectiveness and applicability of the method make it a good choice for routine analysis of the two compounds and early diagnosis of chronic diseases associated with abnormalities in their physiological levels.

New Tb3+-simvastatin optical biosensor for sensitive determination of folic acid, progesterone, testosterone and vitamin D3 in biological fluids.

An innovative, simple and cost effective Tb3+-simvastatin photo probe was designed and used as a core for a spectrofluorometric approach to sensitively determine four vital biological compounds in different matrices. A Tb3+-simvastatin complex displays a characteristic electrical band with λ em at 545 nm with significant luminescence intensity, which is quenched in the presence of folic acid, progesterone, testosterone and vitamin D3 at four variant sets of pH: 5.0, 6.2, 7.5 and 9.0, respectively. The conditions were optimized and the best solvent for operation was found to be acetonitrile at λ ex at 340 nm. Folic acid was successfully estimated in tablet dosage form, urine and serum in the concentration range of 2.49 × 10-9 to 1.28 × 10-6 mol L-1. Progesterone, testosterone and vitamin D3 were also assessed in serum samples using the same optimal conditions within concentration ranges of 5 × 10-9 to 1.9 × 10-6, 5 × 10-9 to 2.8 × 10-6 and 5 × 10-9 to 4.2 × 10-6 mol L-1, respectively. The proposed luminescence method was validated in accordance with ICH guidelines and found to be accurate, precise, and specific and free from any interference at the working pH for each analyte. The cost effectiveness and applicability of the method make it a good choice for routine analysis of the four compounds and early diagnosis of chronic diseases associated with abnormalities in their physiological levels.

Highly Selective Optical Sensor Eu (TTA)3 Phen Embedded in Poly Methylmethacrylate for Assessment of Total Prostate Specific Antigen Tumor Marker in Male Serum Suffering Prostate Diseases.

A low-cost, simple, and highly selective method was used for the assessment of total prostate specific antigen (tPSA) in the serum of prostate cancer patients. This method is based on quenching the intensity of luminescence displayed by the optical sensor Eu (TTA)3 phen/poly methylmethacrylate (PMMA) thin membrane or film upon adding different concentrations of tPSA. The luminescent optical sensor was synthesized and characterized through absorption, emission, scanning electron microscopy (SEM), and x-ray diffraction (XRD), and is tailored to present red luminescence at 614 nm upon excitation at 395 nm in water. The fabricated sensor fluorescence intensity is quenched in the presence of tPSA in aqueous media. The fluorescence resonance energy transfer (FRET) is the main mechanism by which the sensor performs. The sensor was successfully utilized to estimate tPSA in the serum of patients suffering prostate cancer in a time and cost effective way. The statistical results of the method were satisfactory with 0.0469 ng mL-1 as a detection limit and 0.99 as a correlation coefficient.